Part Number Hot Search : 
TFS70L14 SF302 MP3414A 100MS 100ML TSH71CPT ZXTP2013 AM2088A
Product Description
Full Text Search
 

To Download CTS25U Datasheet File
  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
　
 

  Datasheet File OCR Text:
 FEED-THROUGH 35 or 32mm DIN Rail
Altech "U" Series Universal Rail Mounting Standard Screw Clamp Feed through terminals are the most versatile terminals for wire-to-wire connection in control, automation, instrumentation and power distribution applications. A special design feature on the flexible foot enables easy mounting and dismounting from the DIN Rail with the help of a screwdriver. The terminals with AEx eII EEx eII can be used in a potentially explosive atmosphere which may occur in chemical and petrochemical industry. These terminals can be used in Class 1, Zone 0, 1 & 2 hazardous locations. These terminal blocks comply to En 500019.
CTS2.5U-N
CTS4U-N
AEx eII EEx eII Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque Terminal Block End Plate Isolation Partition 5 mm 45 x 43 mm 9 mm Polyamide 6.6 2 screw clamps & 1 tapped hole for cross connection
C US
AEx eII EEx eII 6 mm 45 x 43 mm 9 mm Polyamide 6.6 2screwclamps&1tappedholeforcrossconnection
C US
C
22-12 AWG 600V 25 A 7 lb-in Cat. No. CTS2.5U-N EP2.5/4UN PP2.5/4UN SP2.5/4UN
0.5-2.5 sq.mm 750V 24 A 0.4 Nm Std. Pk. 100 50 50 100
22-14 AWG 600V 20 A 7 lb-in
E220514
US
C
22-10 AWG 600 V 35/40 A* 7 lb-in Cat. No. CTS4U-N EP2.5/4UN PP2.5/4UN SP2.5/4UN
0.5-4 sq.mm 750 V 32 A 0.5 Nm Std. Pk. 100 50 50 100
22-10 AWG 600 V 35/40A* 7 lb-in
E220514
US
COLOR BLOCKS
(other than grey standard)
Separator Plate DIN Rail
for ordering information refer to page 62
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
End Stop
for ordering information refer to page 63
CA702 CA802 2 pole 3 pole 4 pole 10 pole 100 pole 2 pole 3 pole 4 pole 10 pole 100 pole CA721/2 CA721/3 CA721/4 CA721/10 CA721/100 CA741/2 CA741/3 CA741/4 CA741/10 CA741/100 CA703/01 CA704/01 CA705/01 CA731/10 -- CA731/100 CA 707/S/Q/01 CA717/2 CA717/3 CA717/4 CA717/10 MT5
50 50 100 50 50 10 10 100 50 50 10 10 100 100 100 100 10 100 100 100 100 25 100
CA702 CA802 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA707/S/Q/01 CA713/2 CA713/3 CA713/4 CA713/10 MT6
50 50 100 50 50 10 10 100 50 50 10 10 100 100 100 100 100 10 100 100 100 50 25 100
Internal Jumper
Insulated Internal Jumper
Current Bars
2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
Warning labels available. See page 67.
Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole
* 35A with one No. 10 AWG and 40A with two No. 12 AWG wires.
Marking Tags Warning Label
12
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
CTS6U
CTS10U
CTS16U
CTS25U
AEx eII EEx eII 8 mm 47 x 43 mm 12 mm Polyamide 6.6 2 screw clamps & 1 tapped hole for cross connection
C US
AEx eII EEx eII 10 mm 47 x 43 mm 12 mm Polyamide 6.6 2 screw clamps & 1 tapped hole for cross connection
C US
AEx eII EEx eII 12 mm 47 x 43 mm 16 mm Polyamide 6.6 2 screw clamps & 1 tapped hole for cross connection
C US
AEx eII EEx eII 12 mm 56 x 49.5 mm 18 mm Polyamide 6.6 2 screw clamps & 1 tapped hole for cross connection
C US
C
22-8 AWG 600 V 50 A 9 lb-in Cat. No. CTS6U EP6/10U PP6/10U SP6/10U
1.5-6 sq.mm 750 V 41 A 0.8 Nm
22-8 AWG 600 V 50 A 14 lb-in
E220514
US
C
22-6 AWG 600 V 65 A 14 lb-in Cat. No. CTS10U EP6/10U PP6/10U SP6/10U
1.5-10 sq.mm 750 V 57 A 1.2 Nm Std. Pk. 100 50 50 100
16-6 AWG 600 V 65 A 14 lb-in
E220514
US
C
22-6 AWG 600 V 70 A 14 lb-in Cat. No. CTS16U
2.5-16 sq.mm 800 V 76 A 1.2 Nm Std. Pk. 50
20-4 AWG 600 V 85 A 14 lb-in
E220514
US
C
12-2 AWG 600 V 115 A 25 lb-in Cat. No. CTS25U EP25U PP25U
6-25 sq.mm 750 V 101 A 2.0 Nm
14-2 AWG 600 V 115 A 25 lb-in
E220514
US
Std. Pk. 100 50 50 100
Std. Pk. 50 50 50
SP6/10U
100
CA702 CA802 CA723/2 CA723/3 CA723/4 CA723/10
50 50 100 50 50 10
CA702 CA802 CA724/2 CA724/3 CA724/4 CA724/10
50 50 100 50 50 10
CA702 CA802 CA751/2 CA751/3 CA751/4 CA751/10
50 50 50 50 50 10
CA702 CA802 CA725/2 CA725/3 CA725/4 CA725/10
50 50 50 25 25 10
CA743/2 CA743/3 CA743/4 CA743/10 CA703/2 CA704/2 CA705/2 CA733/10
100 50 50 10 100 100 100 100
CA744/2 CA744/3 CA744/4 CA744/10 CA703/3 CA704/3 CA705/3 CA734/10
100 50 50 10 100 100 100 100
CA761/2 CA761/3 CA761/4 CA761/10 CA703/8 CA704/8 CA705/8 CA739/10
50 50 50 10 100 100 100 100
CA745/2 CA745/3 CA745/4 CA745/10 CA703/4 CA704/4 CA705/4 CA735/10
50 25 25 10 100 100 100 100
CA707/S/Q/1 CA710/2 CA710/3 CA710/4 CA710/10 MT8 SWL6
100 100 100 100 25 100 100
CA707/S/Q/1 CA718/2 CA718/3 CA718/4 CA718/10 MT10
100 100 50 50 25 100
CA707/S/Q/5
100
CA707/S/Q/2
100
MT12
100
MT12
100
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
13
CTS35U
CTS50U
CTS95U
AEx eII EEx eII Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque Terminal Block End Plate Isolation Partition Separator Plate DIN Rail
for ordering information refer to page 62
15 mm 58 x 52.5 mm 18 mm Polyamide 6.6 2 screw clamps & 1 tapped hole for cross connection
C US
20.5 mm 75.5 x 71 mm 22 mm Polyamide 6.6 2 screw clamp connections
C US
25 mm 90 x 83 mm 24 mm Polyamide 6.6 2 Allen screw clamp connections
US
C US
C
E220514
US
C
E220514
C
E220514
US
8-2 AWG 600 V 145 A 25 lb-in Cat. No. CTS35U EP35U PP35U
10-35 sq.mm 750 V 125 A 2.5 Nm
8-2 AWG 600 V 145 A 25 lb-in
6-2/0 AWG 16-50 sq.mm 600V 150 A 60 lb-in 1000 V 150 A 6.8 Nm
6-2/0 AWG 600 V 150 A 60 lb-in
2-4/0 AWG 16-95 sq.mm 600V 230 A 160 lb-in 1000 V 232 A 18.2 Nm
2-4/0 AWG 600 V 230 A 160 lb-in
Std. Pk. 50 50 50
Cat. No. CTS50U
Std. Pk. 20
Cat. No. CTS95U
Std. Pk. 10
End Stop
for ordering information refer to page 63
CA702 CA802 CA726/2 CA726/3 CA726/4 CA726/10 CA746/2 CA746/3 CA746/4 CA746/10 CA703/5 CA704/5 CA705/5 CA736/10 CA707/S/Q/2 MT15
50 50 50 25 25 10 50 25 25 10 100 100 100 100 100 100
CA202 CA102
50 50
CA202 CA102
50 50
Internal Jumper
Insulated Internal Jumper
Current Bars
Shorting Sleeve & Screw Marking Tags
MT20
100
MT25
100
14
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
FEED-THROUGH MULTI-CONNECTION 35 or 32mm DIN Rail
Connect multiple wires to a single terminal block and eliminate reliability problems encountered when connecting two wires into a single clamp. Two versions are available. Type CMC1-2 features a single screw-cage clamp for 22-10 AWG wires on one side and two clamps on the other side for 22-10 AWG wires. Type CMC2-2 has two identical clamps for 22-10 AWG wires on both sides.
CMC1-2
CMC2-2
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque
6 mm 47 x 46.5 mm 9 mm Polyamide 6.6 3screwclamps&1tappedholeforcrossconnection
C US
6 mm 51.5 x 65 mm 9 mm Polyamide 6.6 4screwclamps&2tappedholesforcrossconnection
C US
C
22-10AWG 600 V 35 A 7 lb-in. Cat. No.
0.5-4 sq.mm 600 V 32 A 0.5 Nm Std. Pk. 100 50
22-10 AWG 600 V 35 A 7 lb-in.
E220514
US
C
22-10 AWG 600 V 35 A 7 lb-in. Cat. No. CMC2-2 EPCMC2-2
0.5-4 sq.mm 600 V 32 A 0.5 Nm Std. Pk. 50 50
22-10 AWG 600 V 35 A 7 lb-in.
E220514
US
Terminal Block End Plate DIN Rail
for ordering information refer to page 62
CMC1-2 EPCMC1-2
End Stop
for ordering information refer to page 63
CA702 CA802 2 pole 3 pole 4 pole 10 pole 100 pole 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA707/S/Q/01 2 pole 3 pole 4 pole 10 pole CA713/2 CA713/3 CA713/4 CA713/10 MT6
50 50 100 50 50 10 5 100 50 50 10 5 100 100 100 100 100 10 100 100 100 50 25 100
CA702 CA802 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA707/S/Q/01 CA713/2 CA713/3 CA713/4 CA713/10 MT6
50 50 100 50 50 10 5 100 50 50 10 5 100 100 100 100 100 10 100 100 100 50 25 100
Internal Jumper
COLOR BLOCKS
(other than grey standard)
Insulated Internal Jumper
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
Current Bars
2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
Shorting Sleeve & Screw External Jumper
for use in upper level
Marking Tags
(MT Type)
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
15
FEED-THROUGH DOUBLE LEVEL 35 or 32mm DIN Rail
Altech double level terminals are the answer to high wiring density problems posed by certain unavoidable wiring arrangements. Double level terminals have the following advantages: * Double wiring density available without extension of mounting rails. * Interconnection/shorting can be done at both levels. * Marking/identification by marking tags possible at both levels. CDL4U(I.S) internally shorted double level terminals are useful for distribution applications by using shorting links at lower levels.
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque 6 mm 54 x 55.5 mm 9 mm
CDL4U
CDL4U(I.S)
6 mm 54 x 55.5 mm 9 mm Polyamide 6.6 4screwclamps&1tappedholeforcrossconnection
C US
Polyamide 6.6 4screwclamps&2tappedholesforcrossconnection
C US
C
US E220514
C
22-10 AWG 300V 35 A 7 lb-in Cat. No.
0.5-4 sq.mm 400 V 32 A 0.5 Nm Std. Pk. 100 50 100
22-10 AWG 600 V 35 A 7 lb-in
22-10 AWG 300 V 35 A 7 lb-in Cat. No. CDL4U(I.S) EPCDL4U SPCDL4U
0.5-4 sq.mm 400 V 32 A 0.5 Nm Std. Pk. 100 50 100
22-10 AWG 600 V 35 A 7 lb-in
US E220514
Terminal Block End Plate Separator Plate DIN Rail
for ordering information refer to page 62
CDL4U EPCDL4U SPCDL4U
End Stop
for ordering information refer to page 63
CA702 CA802 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 CA747/2 CA747/3 CA747/4 CA747/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q 2 pole 3 pole 4 pole 10 pole CA714/2 CA714/3 CA714/4 CA714/10 MT2
50 50 100 50 50 10 100 50 50 10 100 100 100 100 100 10 100 100 100 50 25 100
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA747/2 CA747/3 CA747/4 CA747/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q CA714/2 CA714/3 CA714/4 CA714/10 MT2
50 50 100 50 50 10 100 50 50 10 100 100 100 100 100 10 100 100 100 50 25 100
Internal Jumper
COLOR BLOCKS
(other than grey standard)
Insulated Internal Jumper Current Bars
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
Shorting Sleeve & Screw External Jumper
Marking Tags
(MT Type)
16
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
FEED-THROUGH OFFSET DOUBLE LEVEL
Altech Offset Double Level Terminals, which provide a separate connection at two levels. In ODL, the top level is offset from the bottom level by half the thickness of the terminal. This offset provides better accessibility to the screws on the lower level. *It is recommended to use end plates at both ends of assembled ODL terminal sets for flat alignment to enable effective use of end stops.
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque 6 mm 63 x 68 mm 9 mm
ODL4U
Polyamide 6.6 4screwclamps&2tappedholesforcrossconnection
C US
C
22-10 AWG 600 V 35 A 7 lb-in Cat. No.
0.5-4 sq.mm 600 V 32 A 0.5 Nm Std. Pk. 50 50 50
22-10 AWG 600 V 35 A 7 lb-in
US E220514
Terminal Block End Plate* DIN Rail
for ordering information refer to page 62
ODL4U Front Back EPODL4U EP1ODL4U
End Stop
for ordering information refer to page 63
CA702 CA802 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 CA747/2 CA747/3 CA747/4 CA747/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q 2 pole 3 pole 4 pole 10 pole CA714/2 CA714/3 CA714/4 CA714/10 MT6
50 50 10 10 10 10 100 50 50 10 100 100 100 100 100 10 100 100 100 50 25 100
Internal Jumper
COLOR BLOCKS
(other than grey standard)
Insulated Internal Jumper Current Bars
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
Shorting Sleeve & Screw External Jumper
Marking Tags
(MT Type)
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
17
FEED-THROUGH TRIPLE LEVEL 35 or 32mm DIN Rail
For applications with extreme space constraints. Only 6mm (.236") wide, with three separate feed-through levels. Jumpers can be used to reduce field wiring. They can also be used in control systems where sensors and actuator applications are involved. The top level of CTL2.5UH terminal block provide connecting points for signal while middle and bottom level provide connecting points are used for positive and negative potential. In applications where switching indication is required, choice of CTL2.5UHL and CTL2.5UL terminal blocks with built-in electronic components are available.
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque 6 mm
CTL2.5U-H
CTL2.5U
6 mm 67 x 84 mm 9 mm Polyamide 6.6 6Screwclamps&3tappedholesforcrossconnection
C US
67 x 61 mm 9 mm Polyamide 6.6 4Screwclamps&3tappedholesforcrossconnection
C US
E220514
E220514
22-12 AWG 0.5-2.5 sq.mm 22-12 AWG 300 V 25 A 4.5 lb-in Cat. No. 500 V 24 A 0.4 Nm Std. Pk. 50 50 300 V 25 A 4.5 lb-in
22-12 AWG 0.5-2.5 sq.mm 22-12 AWG 300 V 25 A 4.5 lb-in Cat. No. CTL2.5U EPCTL2.5U 500 V 24 A 0.4 Nm Std. Pk. 50 50 300 V 25 A 4.5 lb-in
Terminal Block End Plate DIN Rail
for ordering information refer to page 62
CTL2.5U-H EPCTL2.5U-H
End Stop
for ordering information refer to page 63
CA702 CA802 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA707/S/Q/01 2 pole 3 pole 4 pole 10 pole CA715/2 CA715/3 CA715/4 CA715/10 MT2
50 50 100 50 50 10 5 100 100 100 100 100 10 100 100 100 100 50 100
CA702 CA802 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA707/S/Q/01 CA715/2 CA715/3 CA715/4 CA715/10 MT2
50 50 100 50 50 10 5 100 100 100 100 100 10 100 100 100 100 50 100
COLOR BLOCKS
(other than grey standard)
Internal Jumper
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
Current Bars
2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
Shorting Sleeve & Screw External Jumper
Marking Tags
(MT Type)
18
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
CTL2.5U-H(L)*
CTL2.5U(L)*
6 mm 67 x 61 mm 9 mm Polyamide 6.6 4Screwclamps&2tappedholesforcrossconnection
C US
6 mm 67 x 84 mm 9 mm Polyamide 6.6 6Screwclamps&2tappedholesforcrossconnection
C US
E220514
E220514
22-12 AWG 300 V 25 A 4.5 lb-in Cat. No.
0.5-2.5 sq.mm 500 V 24 A 0.4 Nm
22-12 AWG 300 V 25 A 4.5 lb-in
22-12 AWG 300 V 25 A 4.5 lb-in Cat. No. CTL2.5U(L)* EPCTL2.5U
0.5-2.5 sq.mm 500 V 24 A 0.4 Nm Std. Pk. 50 50
22-12 AWG 300 V 25 A 4.5 lb-in
Std. Pk. 50 50
CTL2.5U-H(L)* EPCTL2.5U-H
Ideal for sensor applications. See Altech's Inductive Proximity Sensor catalog for ordering information.
CA702 CA802 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA707/S/Q/01 CA715/2 CA715/3 CA715/4 CA715/10 MT2
50 50 100 50 50 10 5 100 100 100 100 100 10 100 100 100 100 50 100
CA702 CA802 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA707/S/Q/01 CA715/2 CA715/3 CA715/4 CA715/10 MT2
50 50 100 50 50 10 5 100 100 100 100 100 10 100 100 100 100 50 100
* Add required voltage to part number as suffix; i.e. CTL2.5U(L)/24 for 24V DC
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 19
DISTRIBUTION BLOCK
Altech CDB Compact Distribution Blocks are an ideal choice for a simplified distribution system. A lug/bolt secures the incoming cable and the screw clamp design of the block provides the outgoing connections. These provide easy connect points and ensure perfect continuity for distribution. A protective shield effectively shrouds the incoming connection. Application Information: Sum of outgoing currents on either side of center should not exceed half the maximum permissible incoming current. Sum of total outgoing currents should not exceed maximum permissible incoming current. Connection for higher outgoing currents should be done through the terminal nearest to the incoming connection. CMDB blocks are the modified version of CDB terminal blocks without central incoming terminal connections.
CDB4
CDB4(1)
Terminal Width Height & Width Stripping Length Insulation Material Type of Connection Input Output Approvals Wire Range Input Output
6 mm 45 x 43 mm 9 mm Polyamide 6.6 1 Lug/ M5 bolt connection for ring lug Screw clamp connection
C US
6 mm 45 x 43 mm 9 mm Polyamide 6.6 1 Lug M5 /bolt connection for ring lug Screw clamp connection
E220514
C US
E220514
10-8 AWG 22-12 AWG 600 V 50 A 25 A 26 lb-in 7 lb-in
6-16 sq.mm 0.5-4 sq.mm 750 V
10-8 AWG 22-10 AWG 600 V 50 A 35 A 26 lb-in 7 lb-in
10-8 AWG 22-12 AWG 600 V 50 A 25 A 26 lb-in 7 lb-in
6-16 sq.mm 0.5-4 sq.mm 750 V
10-8 AWG 22-10 AWG 600 V 50 A 35 A 26 lb-in 7 lb-in
Voltage Rating Current Rating Input Max. Individual Output Torque Input Output
32 A 2.0 Nm 0.5 Nm
32 A 2.0 Nm 0.5 Nm
Terminal Block
Cat. No. CDB4/1 CDB4/2 CDB4/3 CDB4/4 CDB4/5
H x W x L (mm) Outputs Std.Pk H x W x L (mm) Outputs Std.Pk. Cat. No. 45 x 43 x 43.8 4 10 CDB4/2(1) 45 x 43 x 52 4 10 45 x 43 x 55.8 8 10 CDB4/3(1) 45 x 43 x 58 6 10 45 x 43 x 67 .8 12 10 CDB4/4(1) 45 x 43 x 64 8 5 45 x 43 x 80 16 5 CDB4/5(1) 45 x 43 x 70 10 5 45 x 43 x 96 20 5 CDB4/6(1) 45 x 43 x 76 12 5 CDB4/10(1) 45 x 43 x 100 20 5 CDB4/11(1) 45 x 43 x 106 22 5 Std. Pk. Cat. No. Std. Pk.
Cat. No.
COLOR BLOCKS
(other than grey standard)
DIN Rail
for ordering information refer to page 62
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
End Stop
for ordering information refer to page 63
CA702 CA802
50 50
CA702 CA802
50 50
Marking Tags Warning Label
(MT Type)
MT6
100
MT6
100
20
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
CDB6
CDB10
CMDB4
8 mm 43 x 47 mm 12 mm Polyamide 6.6 1 Lug/ M6 bolt connection for ring lug Screw clamp connection
C US
10 mm 43 x 47 mm 12 mm Polyamide 6.6 1 Lug/ M8 bolt connection for ring lug
6 mm 45 x 43 mm 9 mm Polyamide 6.6 Screw clamp connection
Screw clamp connection
E220514
C US
E220514
10-6 AWG 22-8 AWG 600 V 100 A 50 A 25 lb-in 9 lb-in
6-25 sq.mm 1.5-6 sq.mm 750 V
10-2 AWG 22-8 AWG 600 V 100 A 50 A 35 lb-in 14 lb-in
7-2 AWG 15-7 AWG 600 V 125 A 65 A 53 lb-in 14 lb-in
10-35 sq.mm 1.5-10 sq.mm 750 V
8-1/0 AWG 22-6 AWG 600 V 130 A 65 A 53 lb-in 14 lb-in
22-10 AWG 600 V 35 A
0.5-4 sq.mm 800 V 32 A
22-10 AWG 600 V 35 A
41 A 3.0 Nm 0.8 Nm
57 A 6.0 Nm 1.2 Nm
7 lb-in
0.5 Nm
7 lb-in
Cat. No.
H x W x L (mm)
Outputs Std.Pk 8 12 16 10 10 5
Cat. No.
H x W x L (mm) Outputs Std.Pk 8 12 16 10 10 5
Cat. No. CMDB4/2 CMDB4/3 CMDB4/4 CMDB4/10
H x W x L (mm) Outputs Std.Pk 45 x 43 x 13.5 4 45 x 43 x 19.5 6 45 x 43 x 25.5 8 45 x 43 x 61.5 20 10 10 5 5
CDB6/2 43 x 47 x 64 CDB6/3 43 x 47 x 80 CDB6/4 43 x 47 x 96
CDB10/2 43 x 47 x 72 CDB10/3 43 x 47 x 92 CDB10/4 43 x 47 x 112
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
Cat. No.
Std. Pk.
CA702 CA802
50 50
CA702 CA802
50 50
CA702 CA802
50 50
MT8 SWL6
100 100
MT10
100
MT6
100
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
21
CMDB6
CMDB10
Terminal Width Height & Width Stripping Length Insulation Material Type of Connection Input Output Approvals Wire Range Input Output
8 mm 43 x 47 mm 12 mm Polyamide 6.6
10 mm 43 x 47 mm 12 mm Polyamide 6.6
Screw clamp connection
Screw clamp connection
22-8 AWG 600 V 50 A 9 lb-in
1.5-6 sq.mm 800 V 41 A 0.8 Nm
22-8 AWG 600 V 50 A 14 lb-in
15-7 AWG 600 V 65 A 14 lb-in
1.5-10 sq.mm 800 V 57 A 1.2 Nm
20-6 AWG 600 V 65 A 14 lb-in
Voltage Rating Current Rating Input Max. Individual Output Torque Input Output
Cat. No. Terminal Block
H x W x L (mm)
Outputs 4 6 8 20
Std.Pk 10 10 10 5
Cat. No. CMDB10/2 CMDB10/3 CMDB10/4 CMDB10/10 Cat. No.
H x W x L (mm) 43 x 48 x 21.5 43 x 48 x 31.5 43 x 48 x 41.5 43 x 48 x 101.5 Std. Pk.
Outputs 4 6 8 20
Std.Pk 10 10 10 5
CMDB6/2 43 x 48 x 17.5 CMDB6/3 43 x 48 x 25.5 CMDB6/4 43 x 48 x 33.5 CMDB6/10 43 x 48 x 81.5 Cat. No. Std. Pk.
DIN Rail
for ordering information refer to page 62
End Stop
for ordering information refer to page 63
CA702 CA802
50 50
CA702 CA802
50 50
Marking Tags Warning Label
(MT Type)
MT8 SWL6
100 100
MT10
100
COLOR BLOCKS
(other than grey standard)
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R
Color Red Blue Black Orange Green Yellow White Beige Dark Brown
Ordering Suffix R BU BL O G Y W BG DB
22
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
ONE PHASE POWER DISTRIBUTION BLOCKS
* Speed of mounting and wiring * IP20 Finger Safe * DIN Rail or Panel Mount * Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) * Accessories increase the number of outputs with only one input.
Part Number: White Gray Approvals Current Rating Voltage Rating No. of Inputs Wire Range Torque Screw Type No. of Outputs Wire Range Torque Wire Range Torque Screw Type Optional Marking Tag (for DB16 and DB35) 80A 600V AC 1 8-4 AWG 13.5lb.-in.
38049
38041
38049 (UL File E98082) DB16 (UL File E220514)
38041 (UL File E98082) DB35 (UL File E220514)
80A 690V AC 1 6-16mm2 1.5Nm
115A 600V AC 1 8-2 AWG 31lb.-in.
125A 690V AC 1 10-35mm2 3.5Nm
Pozi Drive 2 6 6 (2x)8-4 AWG (2x)6-16mm2 13.5lb.-in. 1.5Nm (4x)14-10 AWG (4x)2.5-6mm2 7.2lb.-in. 0.8Nm Pozi Drive 2 MT2
(40 for DB35) Pozi Drive 2
6 14-6 AWG 17.5lb.-in.
6 2.5-16mm2 2Nm
Pozi Drive 2 MT2
Dimensions:
Fork Type Busbar 38045
38041
Accessories Fork Type Busbar Part Number: 38045 to jump 2 Blocks 38046 to jump 8 Blocks can be cut to customer needs 23
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
38032
38020
38019
Part Number: Approvals Current Rating Voltage Rating No. of Inputs Wire Range Torque No. of Outputs Wire Range Torque Wire Range Torque Wire Range Torque
E980082
38032
E980082
38020
E980082
38019
160A
160A 690V AC 1 10-70mm2 4Nm 6 2.5-16mm2 2Nm
230A
250A 690V AC 1 35-120mm2 19Nm 11 2.5-35mm2 3.5Nm 2.5-16mm2 2Nm 2.5-10mm2 2Nm
310A
400A 690V AC 1 95-185mm2 25Nm 11 2.5-35mm2 3.5Nm 2.5-16mm2 2Nm 2.5-10mm2 2Nm
600V AC 1 8-2/0AWG 35.5lb. in. 6 14-6 AWG 17.5lb. in.
600V AC 1 2-4/0AWG 170lb. in. 11 2x 14-2AWG 31lb. in. 5x 14-6AWG 17.5lb. in. 4x 14-8AWG 17.5lb. in.
600V AC 1 3/0-350kcmil 230lb. in. 11 2x 14-2AWG 31lb. in. 5x 14-6AWG 17.5lb. in. 4 x 14-8AWG 17.5lb. in.
Dimensions:
Accessories Part Number:
Copper Jumper Bar 3803221 for 2 Blocks 3803231 for 3 Blocks 3803241 for 4 Blocks can be cut to customer needs
38032
Copper Jumper Bar 3803221
24
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
THREE PHASE POWER DISTRIBUTION BLOCKS
* Speed of mounting and wiring * IP20 Finger Safe * DIN Rail or Panel Mount * Blocks fit with other DIN Rail mountable modular devices * Same compact size for both ratings
38075
38073
3 Pole
Part Number: Approvals Current Rating Voltage Rating No. of Inputs Wire Range Torque No. of Outputs Wire Range Torque
E980082
38075
E980082
38073
115A
115A 690V AC 3x1 10-35mm2 3.5Nm 3x6 2.5-16mm2 2Nm
175A
175A 690V AC 3x1 10-70mm2 4Nm 3x6 2.5-16mm2 2Nm
600V AC 3x1 8-2AWG 31lb. in. 3x6 14-4AWG 17.5lb. in.
600V AC 3x1 8-2/0AWG 35.5lb. in. 3x6 14-4AWG 17.5 lb. in.
Dimensions:
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
25
GROUND 35 and 32mm DIN Rail
Use ground blocks instead of grounding studs and wire lugs to terminate ground wires, saving installation and wiring time. Ground blocks clamp mechanically onto the DIN Rail by tightening the center mounting screw, making a reliable electrical connection between the cage clamp terminals and the DIN Rail. The rail serves as a busbar and automatically distributes ground potential to all other ground terminals on the same rail. Ground blocks can also be used as end stops, preventing other terminal blocks and components from moving laterally on the DIN Rail. They are supplied with a standard green/yellow housing for easy identification and accept standard marking tags. CGT4U, CGT10U and CGT35U can be mounted on both DIN 32mm and DIN 35mm rails. CGT4N & CGT6N can be mounted on 35mm DIN rail and have the same top outer profile as the feed through blocks (CTS4U-N, CTS2.5U-N, CTS6U, CTS10U). CGMT4 can be mounted on 15mm DIN rails and has the same top outer profile as the CMT4 feed through blocks. * High density * Screw-cage clamp * Special clamping foot * Polyamide 6.6 * Color: green/yellow
CGT4U
CGT4N
AEx eII EEx eII Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Torque 6 mm 48 x 43 mm 9 mm Polyamide 6.6 2 screw clamps
C US
6 mm 45.4 x 54.2 mm 9 mm Polyamide 6.6 2 screw clamps
E220514
C US
E220514
22-10 AWG 0.5-4 sq.mm 22-10 AWG 7 lb-in 0.5 Nm 7 lb-in
22-10 AWG 0.5-4 sq.mm 22-10 AWG 7 lb-in 0.8 Nm 7 lb-in
Cat. No. Terminal Block DIN Rail
for ordering information refer to page 62
Std. Pk. 50
Cat. No. CGT4N
Std. Pk. 50
CGT4N
End Plate Marking Tags (MT Type)
EPCGT4U MT6
100 100
EPCGT4U MT6
100 100
Assembly for single phase 3 wire circuits.
26
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
CGT6N
CGT10U
CGT35U
CGMT4
AEx eII EEx eII 8 mm 47 x 54.5 mm 12 mm Polyamide 6.6 2 screw clamps
C US
10 mm 49.5 x 45 mm 12 mm Polyamide 6.6 2 screw clamps
E220514
C US
16 mm 61.5 x 58 mm 18 mm Polyamide 6.6 2 screw clamps
E220514
C US
6 mm 28.5 x 27 mm 9 mm Polyamide 6.6 2 screw clamps
E220514
C US
E220514
22-8 AWG 14 lb-in
1.5-6 sq.mm 0.8 Nm
22-8 AWG 14 lb-in
22-6 AWG 14 lb-in
1.5-10 sq.mm 16-8 AWG 1.2 Nm 14 lb-in
8-2 AWG 25 lb-in
10-35 sq.mm 2.5 Nm
8-2 AWG 25 lb-in
22-10 AWG 0.5-4 sq.mm 22-10 AWG 7 lb-in 0.5 Nm 7 lb-in
Cat. No. CGT6N
Std. Pk. 50
Cat. No. CGT10N
Std. Pk. 50
Cat. No. CGT35N
Std. Pk. 20
Cat. No. CGMT4
Std. Pk. 50
EPCGT4U MT8
100 100
EPCGT4U MT10
100 100
EPCGT4U MT15
100 100
EPCGT4U MT2
100 100
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
27
DISCONNECT 35 or 32mm DIN Rail
Disconnect and test terminals are an ideal choice for measuring control and regulatory circuits.The terminals provide a clear functional advantage for devices having utility instruments and associated transformers. Five versions of disconnect and test terminals are available: * CDTTU - disconnection is achieved by means of a slide Terminal Width link operated with a screw driver.
Height x Length
CDTTU
CDTTU-SH
8 mm 57 x 63 mm 12 mm Polyamide 6.6 2 screw clamps
C US
16 mm 57 x 63 mm 12 mm Polyamide 6.6 4 screw clamps
E220514
C US
* CDTTU-SH - disconnect and test terminals are ideal for use in current transformer applications when it is mandatory to keep the secondary side shorted at any point while taking current measurements. * CKT4U - disconnection is achieved by lifting the knife contact lever. * CSDL4U - hinged diconnection and testing terminal, incorporates a connecting link in place of the fuse link. * CSDL6U - hinged disconnect block for 8 AWG size wires. * DDDL4U - double level disconnect terminal with hinged disconnect in upper level. Specially designed socket head screws act as test/monitoring points in both CDTTU, CDTTU-SH and CKT4U. Important: The disconnecting device is not suitable for interrupting load.The supply must be switched off before operating the slide link/lever.
Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque
16-8 AWG 600 V 41 A 14 lb-in Cat. No.
1.5-6 sq.mm 750 V 41 A 1.2 Nm Std. Pk. 50 50
16-8 AWG 600 V 41 A 14 lb-in
16-8 AWG 300 V 10 A 14 lb-in Cat. No. CDTTU-SH EPCDTTU
1.5-6 sq.mm 300 V 10 A 1.6 Nm Std. Pk. 50 50
16-8 AWG 600 V 10 A 14 lb-in
Terminal Block End Plate Isolation Partition DIN Rail
for ordering information refer to page 62
CDTTU EPCDTTU
for ordering information refer to page 63
End Stop
CA702 CA802 2 pole 3 pole 4 pole 10 pole CA710/2 CA710/3 CA710/4 CA710/10 MT8
50 50 100 100 100 25 100
CA702 CA802 CA710/2 CA710/3 CA710/4 CA710/10 MT8
50 50 100 100 100 25 100
External Jumper
for internal jumpers refer to page 60
Marking Tags (MT Type) (MT Type on Lever)
COLOR BLOCKS
(other than grey standard)
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R
Color Red Blue Black Orange Green Yellow White Beige Dark Brown
Ordering Suffix R BU BL O G Y W BG DB
28
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
CKT4U
CSDL4U
CSDL6U
DDDL4U
6 mm 46 x 46.3 mm 9 mm Polyamide 6.6 2 screw clamps
C US
8 mm 43 x 58 mm 9.5 mm Polyamide 6.6 2 screw clamps
E220514
C US
8 mm 60 x 43 mm 9.5 mm Polyamide 6.6 2 screw clamps
E220514
C US
8 mm 66 x 88 mm 9.5 mm Polyamide 6.6 4 screw clamps
C US
22-10 AWG 600 V 16 A 7 lb-in Cat. No. CKT4U EPCKT4U
0.5-4 sq.mm 750 V 16 A 0.5 Nm
22-10 AWG 600 V 16 A 7 lb-in
22-10 AWG 600 V 14 A 7 lb-in Cat. No. CSDL4U EPCSFL4U PPCSFL4U
0.5-4 sq.mm 750 V 6.3 A 0.5 Nm Std. Pk. 100 50 50
22-10 AWG 600 V 14 A 7 lb-in
22-8 AWG 300 V 10 A 14 lb-in Cat. No. CSDL6U EPCSFL6U
1.5-6 sq.mm 500 V 6.3 A 0.8 Nm
22-8 AWG 300 V 10 A 14 lb-in Cat. No.
22-10 AWG 600 V 14 / 35 A 7 lb-in
22-10 AWG 300 V 14 / 35 A 7 lb-in Std. Pk. 20 25
Std. Pk. 50 50
Std. Pk. 50 50
DDDL4U EPDDFL4U
CA702 CA802 CA713/2 CA713/3 CA713/4 CA713/10 MT6
50 50 100 100 50 25 100
CA702 CA802 CA711/2 CA711/3 CA711/4 CA711/10 MT8 MT2
50 50 100 100 50 25 100 100
CA702 CA802 CA710/2 CA710/3 CA710/4 CA710/10 MT8
50 50 100 50 50 25 100
CA702 CA802 CA711/2 CA711/3 CA711/4 CA711/10 MT8 MT2
50 50 100 100 50 25 100 100
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
29
FUSE BLOCKS
Certain electrical and control systems require protection by fuses. CSFL4U and CSFL6U have a specially designed space for cartridge type glass fuse and accept O5 x 20 or O5 x 25 mm fuses. CAFL4U accepts O1/4 x 1-1/4 in. fuses. The fuse can be engaged or disengaged by the movement of the carrier.
Terminal Width 8 mm 43 x 58 mm 9.5 mm
CSFL4U
CSFL4U(L)*
Fuse not included. 8 mm 43 x 58 mm 9.5 mm
Fuse not included.
Altech fuse terminals are also available with light indication CSFL4U(L). A specially designed built-in circuit gives light indication in the event of fuse blow out. Thus, fault in a circuit can be easily located. However, an application of such terminals must take into consideration residual current flow. CAFL4U(L) is equipped with a LED for blown fuse indication. CAFL4U(N) is equipped with a neon bulb for same application. Important: The disconnecting device is not suitable for interrupting load.The supply must be switched off before operating the slide link/lever. Fuses are sold separately Altech, see page 34 for details.
Height x Length Stripping Length Insulation Material Type of Connection Fusion Voltage Type of Fuse Used Approvals Wire Range Voltage Rating Current Rating Torque
Polyamide 6.6 2 screw clamps
Polyamide 6.6 2 screw clamps 24V AC/DC, 48V AC/DC, 110V AC/DC, 220V AC
O5x20, O5x25 mm
C US
O5x20, O5x25 mm
E220514
C US
E220514
22-10 AWG 600 V 16 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 750 V 6.3 A 0.5 Nm Std. Pk. 100 50 50 600 V 8A 7 lb-in
22-10 AWG 600 V 6.3 A 7 lb-in Cat. No. CSFL4U(L)* EPCSFL4U PPCSFL4U
0.5-4 sq.mm 22-10 AWG 750 V 6.3 A 0.5 Nm Std. Pk. 50 50 50 600 V 8A 7 lb-in
Terminal Block End Plate Isolation Partition DIN Rail
for ordering information refer to page 62
CSFL4U EPCSFL4U PPCSFL4U
End Stop
for ordering information refer to page 63
CA702 CA802 CA711/2 CA711/3 CA711/4 CA711/10 MT8 MT2
50 50 100 100 50 25 100 100
CA702 CA802 CA711/2 CA711/3 CA711/4 CA711/10 MT8 MT2
50 50 100 100 50 25 100 100
External Jumper
2 pole 3 pole 4 pole 10 pole
Marking Tags (MT Type) (MT Type on Lever)
COLOR BLOCKS
(other than grey standard)
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R
Color Red Blue Black Orange Green Yellow White Beige Dark Brown
Ordering Suffix R BU BL O G Y W BG DB
* Add required voltage to part number as a suffix. i.e. CSFL4U(L)/24 for 24V AC/DC.
30
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
CAFL4U
CAFL4U(L)*
CAFL4U(N)
CSFL6U
Fuse not included. 9 mm 50 x 72 mm 12 mm Polyamide 6.6 2 screw clamps 9 mm
Fuse not included. 9 mm
Fuse not included. 8 mm
Fuse not included.
50 x 70 mm 12 mm Polyamide 6.6 2 screw clamps 24VAC/DC, 48VAC/DC, 1 10VAC/DC, 220VAC, 300VAC
50 x 70 mm 12 mm Polyamide 6.6 2 screw clamps 1 10-220VAC O1/4x1 in., O1/4x11/4 in.
E220514
C US
60 x 43 mm 12 mm Polyamide 6.6 2 screw clamps
O1/4x1 in., O1/4x11/4 in.
C US
O1/4x1 in., O1/4x11/4 in.
E220514
C US
O5x20, O5x25 mm
E220514
C US
E220514
22-10 AWG 600 V 16 A 7 lb-in Cat. No. CAFL4U EPCAFL4U
0.5-4 sq.mm 22-10 AWG 600 V 6.3 A 0.5 Nm Std. Pk. 25 50 600 V 12 A 7 lb-in
22-10 AWG 0.5-4 sq.mm 22-10 AWG 600 V 16 A 7 lb-in Cat. No. 600 V 6.3 A 0.5 Nm Std. Pk. 600 V 12 A 7 lb-in
22-10 AWG 0.5-4 sq.mm 22-10 AWG 600 V 16 A 7 lb-in Cat. No. CAFL4U(N) EPCAFL4U 600 V 6.3 A 0.5 Nm Std. Pk. 25 50 600 V 12 A 7 lb-in
22-8 AWG 300 V 10 A 14 lb-in Cat. No. CSFL6U EPCSFL6U
1.5-6 sq.mm 22-8 AWG 500 V 6.3 A 0.8 Nm Std. Pk. 50 50 300 V 10 A 14 lb-in
CAFL4U(L)* 25 EPCAFL4U 50
CA702 CA802 CA716/2 CA716/3 CA716/4 CA716/10 MT9
50 50 50 50 50 25 100
CA702 CA802 CA716/2 CA716/3 CA716/4 CA716/10 MT9
50 50 50 50 50 25 100
CA702 CA802 CA716/2 CA716/3 CA716/4 CA716/10 MT9
50 50 50 50 50 25 100
CA702 CA802 CA710/2 CA710/3 CA710/4 CA710/10 MT8 MT6
50 50 100 100 100 25 100 100
* Add required voltage to part number as a suffix. i.e. CSFL4U(L)/24 for 24V AC/DC.
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 31
FUSE BLOCKS
DDFL4U - Double Level Fuse Terminal with fuse link on the top level has a separate feed through terminal at the lower level. This eliminates use of an additional feed through terminal. In DDFL4U(E), specially designed built in circuit gives light indication in the event of a fuse blow out at the top level. The terminal provides separate feed through connection possibility at the lower level. DDFL4U(LR): This is a modified version of DDFL4U(E) terminal where in two equipotential connection points are available on both ends of the terminal. Important: The disconnecting device is not suitable for interrupting load.The supply must be switched off before operating the slide link/lever. Fuses are sold separately Altech, see page 34 for details.
DDFL4U
DDFL4U(E)*
Fuse not included. Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Fusion Voltage Type of Fuse Used Approvals Wire Range Voltage Rating Current Rating Torque Top Level Bottom Level O5x20, O5x25 mm
C US
Fuse not included. 8 mm 66 x 88 mm 9.5 mm Polyamide 6.6 4 screw clamps 24V AC/DC, 48V AC/DC, 110V AC/DC, 220V AC O5x20, O5x25 mm
8 mm 66 x 88 mm 9.5 mm Polyamide 6.6 4 screw clamps
E220514
C
US
E220514
22-10 AWG 600 V 6.3 A 35 A 7 lb-in Cat. No.
0.5-4 sq.mm 600 V 6.3 A 32 A 0.5 Nm
22-10 AWG 600 V 8A 35 A 7 lb-in
22-10 AWG 600 V 6.3 A 35 A 7 lb-in Cat. No. DDFL4U(E)* EPDDFL4U
0.5-4 sq.mm 600 V 6.3 A 32 A 0.5 Nm Std. Pk. 20 25
22-10 AWG 600 V 8A 35 A 7 lb-in
Std. Pk. 20 25
Terminal Block End Plate DIN Rail
for ordering information refer to page 62
DDFL4U EPDDFL4U
End Stop
for ordering information refer to page 63
CA702 CA802 CA729/2 CA729/3 CA729/4 CA729/10 CA749/2 CA749/3 CA749/4 CA749/10 CA703/6 CA704/6 CA705/6 CA737/10 CA707/S/Q/3 CA711/2 CA711/3 CA711/4 CA711/10 MT8 MT2
50 50 100 50 50 10 100 50 50 10 100 100 100 100 100 100 100 50 25 100 100
CA702 CA802 CA729/2 CA729/3 CA729/4 CA729/10 CA749/2 CA749/3 CA749/4 CA749/10 CA703/6 CA704/6 CA705/6 CA737/10 CA707/S/Q/3 CA711/2 CA711/3 CA711/4 CA711/10 MT8 MT2
50 50 100 50 50 10 100 50 50 10 100 100 100 100 100 100 100 50 25 100 100
Internal Jumper
COLOR BLOCKS
(other than grey standard)
2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
Insulated Internal Jumper Current Bar
Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole
Marking Tags (MT Type) (MT Type on Lever)
*Add required voltage to part number as a suffix. i.e. DDFL4U(E)/24 for 24V AC/DC. ** 25A @ 500 V, 10A @ 690V, 16A @ 500V for fast blow.
32 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
DDFL4ULR
DDFL4U(E)LR*
Fuse not included. Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Fusion Voltage Type of Fuse Used Approvals Wire Range Voltage Rating Current Rating Torque Top Level Bottom Level O5x20, O5x25 mm
C US
Fuse not included. 8 mm 66 x 88 mm 9.5 mm Polyamide 6.6 4 screw clamps 24V AC/DC, 48V AC/DC, 110V AC/DC, 220V AC O5x20, O5x25 mm
8 mm 66 x 88 mm 9.5 mm Polyamide 6.6 4 screw clamps
E220514
C
US
E220514
22-10 AWG 600 V 6.3 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 600 V 6.3 A 0.5 Nm 600 V 6.3 A 7 lb-in
22-10 AWG 600 V 6.3 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 600 V 6.3 A 0.5 Nm 600 V 6.3 A 7 lb-in
Std. Pk. 20 20
Std. Pk. 20 20
Terminal Block End Plate DIN Rail
for ordering information refer to page 62
DDFL4ULR EPDDFL4U
DDFL4U(E)LR* EPDDFL4U
End Stop
for ordering information refer to page 63
CA702 CA802 CA729/2 CA729/3 CA729/4 CA729/10 CA749/2 CA749/3 CA749/4 CA749/10 CA703/6 CA704/6 CA705/6 CA738/10 CA707/S/Q/3 CA711/2 CA711/3 CA711/4 CA711/10 MT8 MT2
50 50 100 50 50 10 100 50 50 10 100 100 100 100 100 100 100 50 25 100 100
CA702 CA802 CA729/2 CA729/3 CA729/4 CA729/10 CA749/2 CA749/3 CA749/4 CA749/10 CA703/6 CA704/6 CA705/6 CA737/10 CA707/S/Q/3 CA711/2 CA711/3 CA711/4 CA711/10 MT8 MT2
50 50 100 50 50 10 100 50 50 10 100 100 100 100 100 100 100 50 25 100 100
Internal Jumper
2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole
Insulated Internal Jumper Current Bar
Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole
Marking Tags (MT Type) (MT Type on Lever)
*Add required voltage to part number as a suffix. i.e. DDFL4U(E)LR/24 for 24V AC/DC. 1 Left or right side connection.
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 33
FUSE HOLDERS
The main characteristics of fuse disconnectors are: * Compliance with IEC 60947-1, IEC 60947-3 * UL508 recognized * Plastic parts are made of material resistant to high temperatures * All contact surfaces are silver plated * Mounting on standard DIN 35 mm rail (DIN EN60715). * Available up to 4 pole * For all sizes a version with electronic indicator is available. There are two technical types of indicator: L (LED) with built in LED diode which blinks after the fuse-link operates. The internal circuit resistance is 2M, thus the total dissipation is minimal. The indicator is capable of operating in conditions of open circuit with minimum capacitance between connection cables. Operating voltage range spans from 50V to 690V AC and DC.
1 POLE
2 POLE
3 POLE
Terminal Width (B) Height x Length Stripping Length Insulation Material Type of Connection Fusion Voltage Type of Fuse Used Approvals Wire Range Voltage Rating Current Rating Torque
C US
17.5 mm 77 x 63.5 mm 11 mm Aculon (R) 2 screw clamps
35 mm 77 x 63.5 mm 11 mm Aculon (R) 2 screw clamps
52.5 mm 77 x 63.5 mm 11 mm Aculon (R) 2 screw clamps
O10 x 38 mm
E212627
C US
O10 x 38 mm
E212627
C US
O10 x 38 mm
E212627
24-4 AWG 1.5-25sq.mm 24-4 AWG 690 V 32A 31 lb-in Cat. No. 400 V** 32A** 690 V 32A
24-4 AWG 1.5-25sq.mm 24-4 AWG 690 V 32A 31 lb-in Cat. No. 400 V** 32A** 690 V 32A
24-4 AWG 1.5-25sq.mm 24-4 AWG 690 V 32A 31 lb-in Cat. No. 400 V** 32A** 690 V 32A
2-2.5 Nm 31 lb-in Std. Pk.
2-2.5 Nm 31 lb-in Std. Pk.
2-2.5 Nm 31 lb-in Std. Pk.
I (NEON) with neon lamp, which is constantly lit after the fuse-link operates. The End Plate internal circuit resistance is 570k, thus it is necessary DIN Rail that the circuit be closed in for ordering information order for the indicator to refer to page 62 function. The operational voltage range is 100 V to 750 End Stop for ordering information V AC.
refer to page 63
Terminal Block Indicator: None LED Neon
CB1038-1 CB1038-1/L CB1038-1/I
1 1 1
CB1038-2 CB1038-2/L CB1038-2/I
1 1 1
CB1038-3 CB1038-3/L CB1038-3/I
1 1 1
CA702 CA802
50 50
CA702 CA802
50 50
CA702 CA802
50 50
* Fuses are sold separately Altech, see page 34 for details.
79 mm (3.11 in.) 64.5 mm (2.54 in.) 47.5 mm (1.87 in.) 37 mm (1.46 in.) 4 mm (0.16 in.) B
40
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
81 mm (3.19 in.)
Dimension for B: 1 Pole 1 Pole + Neutral 2 Pole 3 Pole 3 Pole + Neutral
17.5mm 35mm 35mm 52.5mm 70mm
FUSES
Cylinder Fuses are typically used in industrial applications to protect electrical devices such as motors, drives, etc. They are available in four sizes with a current range from 1 to 125 Amps. Cylinder Fuses have metal caps at both ends, and a porcelain fuse body. Please refer to pg 34 for ordering information for Cylinder Fuse Bases. OPERATING CLASSES gL/gG - Line Protection Slow, typically used for distribution circuits or resistive loads. Typical Markings: gL/gG aM - Motor Protection Fast acting short circuit protection, but slow acting overload protection. Typical Marking: aM aR - Semiconductor Protection Partial range, short circuit protection for devices such as diodes, SCRs. etc. Typical Markings: Ultra RapidTM, SitorTM, SilcuTM, ProtisterTM, RecticurTM, Ultra QuickTM, aR gR - Semiconductor Protection Full range, short circuit protection for devices such as diodes, SCRs. etc. Typical Markings: Ultra RapidTM, SitorTM, SilcuTM, ProtisterTM, RecticurTM, Ultra QuickTM, gR
gL/gG - Line Protection
Standard: IEC 20269-4-1 and IEC60269-1 Rated Voltage: 500V
Rated Current/ Rated Voltate
0.5A 1A 2A 4A 6A 8A 10A 12A 16A 20A 25A 32A*
Cat. No.
2620017 2620000 2620001 2620003 2620005 2620006 2620007 2620008 2620009 2620011 2620013 2620015
Std. Pk.
10 10 10 10 10 10 10 10 10 10 10 10
10x38
aM - Motor Protection
Standard: IEC 20269-4-1 and IEC60269-1 Rated Voltage: 500V
*400V
Rated Current/ Rated Voltate
0.5A 1A 2A 4A 6A 8A 10A 12A 16A 20A 25A 32A*
Cat. No.
2621017 2621000 2621001 2621003 2621005 2621006 2621007 2621008 2621009 2621011 2621013 2621015
Std. Pk.
10 10 10 10 10 10 10 10 10 10 10 10
10x38
Standard: IEC 60269-4-1 Breaking Capacity: ~200 kA Rated Voltage: ~600V**
*400V
aR - Semiconductor Protection
In (A)
6 8 10 12 16 20 25 32
Cat. No.
2625005 2625006 2625007 2625008 2625009 2625011 2625013 2625015
Operating I2-value (As)
30 50 70 120 150 260 290 600
Power Dissipation (W)
1.5 2 2.5 3 3.5 4.8 6 7.5
Std. Pk.
10 10 10 10 10 10 10 10
Note: Other fuse sizes and fuse holders are available. Please refer to the Altech Eurpean Fuse catalog for more information.
10x38
Standard: IEC 60269-4-1 Breaking Capacity: ~200 kA Rated Voltage: ~690V
** 6-25A (700V DC/ breaking capacity -- 50kA) --32A (400V DC/ breaking capacity -- 50kA) ---
gR - Semiconductor Protection Certified for 700V In (A)
1 2 4 6 8 10 12 16 20 25 30
Cat. No.
2645126 2645127 2645128 2645129 2645130 2645131 2645132 2645133 2645134 2645135 2645136
6 mm (0.24 in.) O10.3 mm (0.4 in.)
6 mm (0.24 in.)
Operating I2-value (As)
1.6 8 8 25 39 66 87 166 280 580 1.010
Power Dissipation (W)
1 1.8 1.1 1.6 1.8 2.1 3.1 4.4 5.8 6.8 8.2
Std. Pk.
10 10 10 10 10 10 10 10 10 10 10
10.5 mm (0.4 in.) 38 mm (1.5 in.)
10.5 mm (0.4 in.)
10x38
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
35
MINIATURE FUSES
Miniature Fuses are typically used to protect electronic devices, laboratory and measurement instruments, stereos, TV's, VCR's etc. They are available in four sizes with a current range of 20mA to 20 Amps. Miniature Fuses are manufactured according to VDE 0820 part 1, VDE 0820 part 2, IEC publication 127, CEE publication 4 and actual DIN standards. The 5x20, 5x25 fuses can be used in the CSFL4U series terminal blocks. The 6.3x32 fuse can be used in the CAFL4U series terminal blocks. Operating Class: Slow, Typical Marking: "T" Medium, Typical Marking: "M" Fast, Typical Marking: "F"
5 X 20
5 X 25
6.3 X 32 (1/4" X 1-1/4")
upon request
upon request
Voltage 250V AC/DC DIN 41662 DIN 41571-2 IEC-127-2/III Cat. No. Medium 0.02M5x20M 0.032M5x20M 0.05M5x20T4 0.08M5x20T4 0.1M5x20T4 0.125M5x20T4 0.16M5x20T4 0.2M5x20T4 0.25M5x20T4 0.315M5x20T4 0.4M5x20T4 0.5M5x20T4 0.63M5x20T4 0.7M5x20T4 0.8M5x20T4 1.0M5x20T4 1.25M5x20T4 1.4M5x20T4 1.6M5x20T4 2.0M5x20T4 2.5M5x20T4 3.15M5x20T4 4.0M5x20T4 5.0M5x20T4 6.3M5x20T4 8.0M5x20T1 10.0M5x20T1 12.5M5x20T1 16.0M5x20T1 20.0M5x20T1 Std. Pk. 10 0.05M5x20M 0.063M5x20M 0.08M5x20M 0.1M5x20M 0.125M5x20M 0.16M5x20M 0.2M5x20M 0.25M5x20M 0.315M5x20M 0.4M5x20M 0.5M5x20M 0.63M5x20M 0.7M5x20M 0.8M5x20M 1.0M5x20M 1.25M5x20M 1.4M5x20M 1.6M5x20M 2.0M5x20M 2.5M5x20M 3.15M5x20M 4.0M5x20M 5.0M5x20M 6.3M5x20M 8.0M5x20M 10.0M5x20M 12.5M5x20M1 16.0M5x20M1 20.0M5x20M1
DIN 41661 IEC-127-2/II
Voltage 250V AC/DC DIN 41571-2
Voltage 250V AC/DC
Current 20mA 32mA 40mA 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 700mA 800mA 1.0A 1.25A 1.4A 1.6A 2.0A 2.5A 3.15A 4.0A 5.0A 6.3A 7.0A 8.0A 10.0A 12.5A 16.0A 20.0A
Slow
Fast
Cat. No. Medium
Cat. No. Slow
Fast
0.05M5x20F4
0.1M5x20F4 0.125M5x20F4 0.16M5x20F4 0.2M5x20F4 0.25M5x20F4 0.315M5x20F4 0.4M5x20F4 0.5M5x20F4 0.63M5x20F4 0.7M5x20F4 0.8M5x20F4 1.0M5x20F4 1.25M5x20F4 1.6M5x20F4 2.0M5x20F4 2.5M5x20F4 3.15M5x20F4 4.0M5x20F4 5.0M5x20F4 6.3M5x20F4 8.0M5x20F1 10.0M5x20F1 12.5M5x20F1 16.0M5x20F1 20.0M5x20F1
0.032M5x25M 0.04M5x25M 0.05M5x25M 0.063M5x25M 0.08M5x25M 0.1M5x25M 0.125M5x25M 0.16M5x25M 0.2M5x25M 0.25M5x25M 0.315M5x25M 0.4M5x25M 0.5M5x25M 0.63M5x25M 0.8M5x25M 1.0M5x25M 1.25M5x25M 1.6M5x25M 2.0M5x25M 2.5M5x25M 3.15M5x25M 4.0M5x25M 5.0M5x25M 6.3M5x25M
0.032M6.3x32Tv 0.04M6.3x32Tv 0.05M6.3x32T4 0.063M6.3x32T4 0.08M6.3x32T4 0.1M6.3x32T4 0.125M6.3x32T4 0.16M6.3x32T4 0.2M6.3x32T4 0.25M6.3x32T4 0.315M6.3x32T4 0.4M6.3x32T4 0.5M6.3x32T4 0.63M6.3x32T4 0.7M6.3x32T4 0.8M6.3x32T4 1.0M6.3x32T4 1.25M6.3x32T4 1.6M6.3x32T4 2.0M6.3x32T4 2.5M6.3x32T4 3.15M6.3x32T4 4.0M6.3x32T4 5.0M6.3x32T4 6.3M6.3x32T4 7.0M6.3x32T4 8.0M6.3x32T4 10.0M6.3x32T4 12.5M6.3x32T4 16.0M6.3x32T4 20.0M6.3x32T4 Std. Pk. 10
0.05M6.3x32F 0.063M6.3x32F 0.08M6.3x32F 0.1M6.3x32F 0.125M6.3x32F 0.16M6.3x32F 0.2M6.3x32F 0.25M6.3x32F 0.315M6.3x32F 0.4M6.3x32F 0.5M6.3x32F 0.63M6.3x32F 0.7M6.3x32F 0.8M6.3x32F 1.0M6.3x32F4 1.25M6.3x32F4 1.6M6.3x32F4 2.0M6.3x32F4 2.5M6.3x32F2,4 3.15M6.3x32F2,4 4.0M6.3x32F2,4 5.0M6.3x32F3,4 6.3M6.3x32F3,4 7.0M6.3x32F3 8.0M6.3x32F3 10.0M6.3x32F3 12.5M6.3x32F3 16.0M6.3x32F3 20.0M6.3x32F3
1 Not standard rating. 2 Rated Voltage 150V. 3 Rated Voltage 60V. 4 UL recognized version
available upon request.
8.0M5x25M1 10.0M5x25M1 16.0M5x25M1
Std. Pk. 10
36
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
THERMOCOUPLE TERMINAL BLOCK
Altech thermocouple terminal blocks are designed for use in temperature measuring circuits. The current carrying part of the terminal blocks have the same material (according to DIN437134 and DIN43714) which is used for compensating cables in the temperature measTerminal Width urement circuit (up to 200C). Thus fulfilling the norms stated Height x Length in DIN EN60584. The terminal block is marked for the respective type of thermocouple which enables easy identification for wiring. * CTT2.5UK `K' type Chromel (NiCr) Alumel (NiAl) * CTT2.5UJ `J' type Iron (Fe) Constantan (CuNi) * CTT2.5UT `T' type Copper (Cu) Constantan (CuNi) * CTT2.5UE `E' type Chromel (NiCr) Constantan (CuNi)
Terminal Block Stripping Length Insulation Material Current Carrying Material
CTT2.5UK/J/T/E
10 mm 45 x 43 mm 9 mm Polyamide 6.6 Chromel/Alumel (NiCr/NiAl) 4 screw clamps
Type of Connection Ratings: Wire Range Voltage Rating Current Rating Torque
22-12 AWG 300 V 10 A 7 lb-in
Cat. No. CTT2.5UK CTT2.5UJ CTT2.5UT CTT2.5UE EP2.5/4UN PP2.5/4UN
Std. Pk. 50 50 50 50 50 50
End Plate Isolation Plate DIN Rail for ordering information refer to page 63
COLOR BLOCKS
(other than grey standard)
End Clamp
CA802 CA702
100 100
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
37
Stud Type Terminal Blocks
Altech DIN rail mounting Stud Type Terminal Blocks are preferred for the connections that are subjected to very severe vibrations. The wire is crimped to a ring / fork type lug and is screwed on to the flat current bar in terminal. The range includes terminal blocks for wires of size 22-4 AWG. Jumpering can be achieved with the aid of external jumpers. The jumpers are insulated to make them shock proof. The terminal blocks have marker holding recess to accommodate MT type marking tags. It is recommended to use protective covers in transparent plastic because assemblies of these terminals blocks are not fully covered.
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque 17 mm
CSTSN4U
CSTSN5U
17 mm 44.5 x 50 mm 12 mm Polyamide 6.6 2 screw connection for M5 ring/fork lugs
E220514
C US
44.5 x 50 mm 12 mm Polyamide 6.6 2 screw connection for M4 ring/fork lugs
C US
1
1
E220514
22-6 AWG 600 V 65 A 14 lb-in Cat. No.
1.5-10 sq.mm 800 V 57 A 1.2 Nm Std. Pk. 100 50
22-6 AWG 600 V 65 A 14 lb-in
22-4 AWG 600 V 80 A 17.5 lb-in Cat. No. CSTSN5U
1.5-16 sq.mm 800 V 76 A 2.0 Nm Std. Pk. 100 50
22-4 AWG 600 V 80 A 17.5 lb-in
Terminal Block End Plate
for ordering information refer to page 62
CSTSN4U EPCSTSN5U
EPCSTSN5U
DIN Rail
for ordering information refer to page 63
End Stop
CA702 CA802 2 Terminal 3 Terminal 100 mm 200 mm 300 mm 2 way 3 way 4 way 2 way 3 way 4 way CSTSPC1 CSTSPC1-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 CA514/1-2 CA514/1-3 CA514/1-4 CA514/3-2 CA514/3-3 CA514/3-4 MT2
50 50 100 100 10 10 10 100 50 50 100 50 50 100
CA702 CA802 CSTSPC1 CSTSPC1-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 CA514/1-2 CA514/1-3 CA514/1-4 CA514/3-2 CA514/3-3 CA514/3-4 MT2
50 50 100 100 10 10 10 100 50 50 100 50 50 100
COLOR BLOCKS
(other than grey standard)
Protective Cover for covering Protective Cover in Length
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown
1
Insulated Removable Jumpers
Ordering Suffix R BU BL O G Y W BG DB
Insulated Permanent Jumpers Marking Tags (MT Type)
Approval pending.
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
38
CSTSB4U
CSTSB5U
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque
17 mm 44.5 x 50 mm 12 mm Polyamide 6.6 2 screw connection for M4 ring/fork lugs
C US
17 mm 44.5 x 50 mm 12 mm Polyamide 6.6 2 screw connection for M5 ring/fork lugs
E220514
C US
1
1
E220514
22-6 AWG 600 V 65 A 14 lb-in Cat. No.
1.5-10 sq.mm 800 V 57 A 1.2 Nm Std. Pk. 100 50
22-6 AWG 600 V 65 A 14 lb-in
22-4 AWG 600 V 80 A 17.5 lb-in Cat. No. CSTSB5U EPCSTN5U
1.5-16 sq.mm 800 V 76 A 2.0 Nm Std. Pk. 100 50
22-4 AWG 600 V 80 A 17.5 lb-in
Terminal Block End Plate DIN Rail
for ordering information refer to page 62 for ordering information refer to page 63
CSTSB4U EPCSTN5U
End Stop
CA702 CA802 2 Terminal 3 Terminal 100 mm 200 mm 300 mm 2 way 3 way 4 way 2 way 3 way 4 way CSTSPC1 CSTSPC1-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 CA514/1-2 CA514/1-3 CA514/1-4 CA514/3-2 CA514/3-3 CA514/3-4 MT2
50 50 100 100 10 10 10 100 50 50 100 50 50 100
CA702 CA802 CSTSPC1 CSTSPC1-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 CA514/1-2 CA514/1-3 CA514/1-4 CA514/3-2 CA514/3-3 CA514/3-4 MT2
50 50 100 100 10 10 10 100 50 50 100 50 50 100
Protective Cover for covering Protective Cover in Length
Insulated Removable Jumpers
Insulated Permanent Jumpers Marking Tags (MT Type)
1
Approval pending.
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 39
INDICATOR/ DIODE CIRCUITS 35 or 32mm DIN Rail
Altech offers different types of terminals incorporating electronic components for signal converting, circuit protection and status indication. Based on customer requirements, specially assembled terminals are offered. CDL4U(O) - Double level terminal with open lower current bar to accommodate electronic components like diodes, resistors, LEDs, etc. Diode Specifications
Diode 1N 4007 Diode Reverse Voltage 1000 V Diode Current 1A Terminal Width Height x Length Terminal Voltage Stripping Length Approvals Wire Range Voltage Rating Current Rating Torque
CDL4U(E)D1/D2
CDL4U(E)D3
With arc suppression circuit for contactors and solenoid valves - DC
Diode circuit for reverse polarity protection
6 mm 54 x 55.5 mm 300 V~ 9 mm
C US
6 mm 54 x 55.5 mm 300 V~ 9 mm
E220514
C US
E220514
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm Std. Pk. 100 100 50 600 V 35 A 7 lb-in
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 400 V 32 A 0.5 Nm Std. Pk. 100 50
22-10 AWG 600 V 35 A 7 lb-in
Terminal Block End Plate DIN Rail
for ordering information refer to page 62
CDL4U(E)D1 CDL4U(E)D2 EPCDL4U
CDL4U(E)D3 EPCDL4U
End Stop
for ordering information refer to page 63
CA702 CA802 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
50 50 10 10 10 10 100 100 100 100 100 10 100 100
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
50 50 10 10 10 10 100 100 100 100 100 10 100 100
Internal Jumper
Current Bars
COLOR BLOCKS
(other than grey standard)
2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
Shorting Sleeve & Screw Marking Tags (MT Type)
1 C
2
1 4
2
3
3
C
4
D1
1 C 2
D3
3
4
D2 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
40
CDL4U(E)DD1/DD2
CDL4U(E)DD3/DD4
CDL4U(E)D4
CDL4U(E)DD5
Diode circuit for lamp testing
Diode circuit for lamp testing
Diode circuit for lamp testing with LED series resistance
Diode circuit for lamp testing with LED series resistance
6 mm 54 x 55.5 mm 300 V~ 9 mm
C US
6 mm 54 x 55.5 mm 300 V~ 9 mm
E220514
C US
6 mm 54 x 55.5 mm 24 V- 9 mm
E220514
C US
6 mm 54 x 55.5 mm 24 V~ 9 mm
E220514
C US
E220514
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm Std. Pk. 600 V 35 A 7 lb-in
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm Std. Pk. 600 V 35 A 7 lb-in
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm Std. Pk. 100 50 600 V 35 A 7 lb-in
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm Std. Pk. 600 V 35 A 7 lb-in
CDL4U(E)DD1 100 CDL4U(E)DD2 100 EPCDL4U 50
CDL4U(E)DD3 100 CDL4U(E)DD4 100 EPCDL4U 50
CDL4U(E)D4 EPCDL4U
CDL4U(E)DD5 100 EPCDL4U 50
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
50 50 10 10 10 10 100 100 100 100 100 10 100 100
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
50 50 10 10 10 10 100 100 100 100 100 10 100 100
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
50 50 10 10 10 10 100 100 100 100 100 10 100 100
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
50 50 10 10 10 10 100 100 100 100 100 10 100 100
1 C C
2
+3
1 C C
2
1
+4
2 C 3
1 C C
2
3
+4
3
+4
+4
1 C
DD1
C
2
+3
1
DD3
C C
2
D4
DD5
3
-4
+4
DD2
DD4
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
41
CDL4U(E)N1
CDL4U(E)LD5*
CDL4U(E)LD3*
AC voltage indicator with neon lamp
AC voltage indicator with LED
AC/ DC voltage indicator with LED
Terminal Width Height x Length Terminal Voltage Stripping Length Approvals Wire Range Voltage Rating Current Rating Torque
6 mm 54 x 55.5 mm 100 V~ to 220 V 9 mm
C US
6 mm 54 x 55.5 mm 24 V~, 48 V~, 120V~, 220V~ 9 mm
E220514
C US
6 mm 54 x 55.5 mm 12 V~, 24 V~ 9 mm
E220514
C US
E220514
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm Std. Pk. 50 50 600 V 35 A 7 lb-in
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm Std. Pk. 600 V 35 A 7 lb-in
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm Std. Pk. 600 V 35 A 7 lb-in
Terminal Block End Plate DIN Rail
for ordering information refer to page 62
CDL4U(E)N1 EPCDL4U
CDL4U(E)LD5* 50 EPCDL4U 50
CDL4U(E)LD3* 50 EPCDL4U 50
End Stop
for ordering information refer to page 63
CA702 CA802 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
1
50 50 10 10 10 10 100 100 100 100 100 10 100 100
2
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
1
50 50 10 10 10 10 100 100 100 100 100 10 100 100
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
+1
50 50 10 10 10 10 100 100 100 100 100 10 100 100
Internal Jumper
Current Bars
2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
Shorting Sleeve & Screw Marking Tags (MT Type)
3
4
3
C
4
+3
+4
N1
LD5
LD3
* Add required voltage to part number as a suffix i.e. CDL4U(E)LD5/110 is for 110V. 42 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
CDL4U(E)LD4*
CDL4U(E)LD1/LD2
CDL4U(E)L1/L2*
CDL4U(O)
AC/ DC voltage indicator with LED
DC voltage indicator with LED
DC voltage indicator with LED
Electronic Component Carrier
6 mm 54 x 55.5 mm 24 V~ 9 mm
C US
6 mm 54 x 55.5 mm 24 V- 9 mm
E220514
C US
6 mm 54 x 55.5 mm 6 V-, 24 V-, 60 V- 9 mm
E220514
C US
6 mm 54 x 55.5 mm - 9 mm
E220514
C US
E220514
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 400 V 32 A 0.5 Nm Std. Pk. 50 50
22-10 AWG 600 V 35 A 7 lb-in
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm Std. Pk. 50 50 50 600 V 35 A 7 lb-in
22-10 AWG 600 V 25 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm Std. Pk. 50 50 50 600 V 35 A 7 lb-in
22-10 AWG 600 V 25 A 7 lb-in Cat. No. CDL4U(O) EPCDL4U
0.5-4 sq.mm 400 V 32 A 0.5 Nm Std. Pk. 100 50
22-10 AWG 600 V 35 A 7 lb-in
CDL4U(E)LD4* EPCDL4U
CDL4U(E)LD1 CDL4U(E)LD2 EPCDL4U
CDL4U(E)L1* CDL4U(E)L2* EPCDL4U
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
-1
50 50 10 10 10 10 100 100 100 100 100 10 100 100
C
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
+1 C
50 50 10 10 10 10 100 100 100 100 100 10 100 100
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
+1 -4
50 50 10 10 10 10 100 100 100 100 100 10 100 100
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q MT2
50 50 10 10 10 10 100 100 100 100 100 10 100 100
+3
+4
-3
-3
-4
LD4
-1
LD1
C
-1 +4
L1
+3
+3
+4
LD2
L2
* Add required voltage to part number as a suffix i.e. CDL4U(E)LD5/110 is for 110V. 43
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
SURGE SUPPRESSOR TERMINAL BLOCKS
In applications where circuit protection against transient overvoltage is required, Altech Surge Suppressor Terminal Blocks with built-in electronic components are recommended. These terminals are designed to protect a single line against a longitudinal (line / earth) surge, thereby protecting distribution and inputs.
CDL4U(E)LA
CDL4U(E)3LA
Lightning Arrestor Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Ratings Wire Range Voltage Rating Nominal Discharge Current Peak Current Response Time Nominal Current Capacitance Application 22-10 AWG 75, 90, 240, 600, 1000 V DC 20 KA (8/20 s) - 100 ns 10A <1.5 pf For coarse line protection of measuring, distributing or data communication interfaces. Cat. No. Terminal Block End Plate DIN Rail
for ordering information refer to page 62
3 Pole Lightning Arrestor 18 mm 54 x 55.5 mm 9 mm Polyamide 6.6 4 screw clamps
12 mm 54 x 55.5 mm 9 mm Polyamide 6.6 4 screw clamps
22-10 AWG 90, 250, 350, 450 V DC 10 KA (8/20 s) - 100 ns 5A <1.0 pf For simultaneous protection of lines against transversal (line/line) and longitudinal (line/earth) surge. Cat. No. CDL4U(E)3LA* EPCDL4U Std. Pk. 20 50
Std. Pk. 20 50
CDL4U(E)LA* EPCDL4U
End Stop
COLOR BLOCKS
(other than grey standard)
for ordering information refer to page 63
CA702 CA802 MT2
50 50 100
CA702 CA802 MT2
50 50 100
Marking Tags (MT Type)
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
* Add required voltage to part number as a suffix i.e. CDL4U(E)LA/75 is for 75V.
44
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
CDL4U(E)MOV1
CDL4U(E)SD
CDL4U(E)RC
MOV 12 mm 54 x 55.5 mm 9 mm Polyamide 6.6 4 screw clamps
Suppressor Diode 12 mm 54 x 55.5 mm 9 mm Polyamide 6.6 4 screw clamps
RC Circuit 18 mm 54 x 55.5 mm 9 mm Polyamide 6.6 4 screw clamps
22-10 AWG 130 V AC* - 2kA-6.5kA (8/20 s) <25ns 10A 100-20,000 pf For protection from voltage surge, spikes Cat. No. CDL4U(E)MOV EPCDL4U Std. Pk. 20 50
22-10 AWG 12-48V DC / 12-160V AC** 1.5 KA (8/20 s) - 1 ns DC / 5 ns AC 10A - For fine protection of data interfcaes, sensors, contacts, etc. Cat. No. CDL4U(E)SD EPCDL4U Std. Pk. 20 50
22-10 AWG 250 V AC / 330 V DC 20A - - 10A 0.1 f or 0.22 f
2
For protection of DC solenoid valves and contactors Cat. No. CDL4U(E)RC EPCDL4U Std. Pk. 10 50
CA702 CA802 MT2
50 50 100
CA702 CA802 MT2
50 50 100
CA702 CA802 MT2
50 50 100
1 A fuse block is recommended to protect MOV terminals by disconnecting the faulted varistor. See pages 28-30 for fuse blocks.
* Other voltages available upon request. Call Altech for voltage selection. ** Phase to Phase / Phase to ground. Call Altech for voltage selection. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 45
TAB, TERMI-POINT(R) TERMINAL BLOCKS
CTC4U Tab Connection terminals offer quick connection. Connection is achieved by pushing the lug onto the tab blade of the terminal block. The terminal housing is so designed that the wall protrudes beyond the tab blades. The CTS4U-TM single level and the CDL4U-TM double level terminal blocks have a provision for clip connection according to DIN 41611-4. Three wires (0.5 sq. mm) can be connected with a clip onto the pin using a special tool (contact Altech for information). These terminal blocks provide high wiring density without extension of the mounting rail. CTC4U is used primarily in railway systems. The CTS4U-TM and the CDL4UTM is used mostly in the telecommunications industry.
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Rated Cross Section Voltage Rating Current Rating Tab Blade Size (mm) 6 mm
CTC4U
CTS4U-TM
CDL4U-TM
Connection Points
6 mm 67 x 43 mm 9 mm Polyamide 6.6
6 mm 84 x 55.5 mm 9 mm Polyamide 6.6
49.5 x 47 mm 9 mm Polyamide 6.6
1 srew connection and 1 blade for 2 srew connections and 2 blades 5 tab connection points and for 6 (0.5 sq. mm) connections 1 tapped hole for cross connection 3 (0.5 sq. mm) connections
0.5-4 sq.mm 250 V 32 A 6.3 x 0.8 Cat No.
22-12 AWG 300 V 25 A 6.3 x 0.8 Std. Pk. 100 50
0.5-4 sq.mm 22-12 AWG 250 V 10 A 0.8 x 1.6 Cat No. CTS4U-TM EP2.5/4UN 300 V 10 A 0.8 x 1.6 Std. Pk. 100 50
0.5-4 sq.mm 22-12 AWG 250 V 10 A 0.8 x 1.6 Cat No. CDL4U-TM EPCDL4U 300 V 10 A 0.8 x 1.6 Std. Pk. 100 50
Terminal Block End Plate DIN Rail
for ordering information refer to page 62
CTC4U EPCTC4U
End Stop
for ordering information refer to page 63
CA702 CA802 2 way 3 way 4 way 10 way 2 way 3 way 4 way 10 way CA727/2 CA727/3 CA727/4 CA727/10 CA747/2 CA747/3 CA747/4 CA747/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q 2 pole 3 pole 4 pole 10 pole MT6
50 50 100 50 50 10 100 50 50 10 100 100 100 100 100 10 100
CA702 CA802 CA722/2 CA722/3 CA722/4 CA722/10 CA742/2 CA742/3 CA742/4 CA742/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA707/S/Q/01 CA713/2 CA713/3 CA713/4 CA713/10
50 50 100 50 50 10 100 50 50 10 100 100 100 100 100 10 100 100 100 50 25 100
CA702 CA802 CA727/2 CA727/3 CA727/4 CA727/10 CA747/2 CA747/ CA747/ CA747/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q CA714/2 CA714/3 CA714/4 CA714/10 MT2
50 50 10 10 10 10 100 50 50 10 100 100 100 100 100 10 100 100 100 50 25 100
Internal Jumper
COLOR BLOCKS
(other than grey standard)
Insulated Internal Jumper Current Bars
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown
Ordering Suffix R BU Shorting Sleeve & Screw BL O External G Jumper Y W BG DB Marking Tags (MT Type)
2 way 3 way 4 way 10 way 10 pole (breakable) 100 pole
100
MT6
46
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
HIGH TEMPERATURE CERAMIC EUROBLOCKSTM
Suitable for use in high temperature applications up to 600C (1112F). Applications include hot melt glue guns, furnaces, heaters, process equipment and machinery. Terminal blocks are offered with mounting holes for panel mounting or free floating applications. Compact, space saving Tubular screw clamp Free float or panel mount Temperature range: 600C (1112F) * Standard color: white * Material Housing: ceramic Clamp: brass Screws: zinc plated steel * * * *
CB4
CB6
CB16
Insulation Material Approvals Wire Range Voltage Rating Current Rating No. of Poles 1 (free floating) 2 (free floating) 2 (with mounting holes) 3 (free floating) 3 (with mounting holes)
C US
Ceramic
E220514
C
Ceramic
US
Ceramic
C US
E220514
E220514
24-12 AWG 24-12 AWG 300V 30 A Cat. No. CB4/1 CB4/2 CB4/2H CB4/3 CB4/3H 300V 20 A Std. Pk. 50 50 50 50 50
22-10 AWG 20-10 AWG 300V 40 A Cat. No. CB6/1 CB6/2H CB6/3H 300V 30 A Std. Pk. 50 50 50
20-6 AWG 300V 76 A Cat. No.
18-6 AWG 300V 65 A Std. Pk.
CB16/2H CB16/3H
50 50
1 Pole
T W1 W2
2 Pole
T
2 Pole with mounting hole
T W2 D1 H C2 W3
3 Pole
T W3
3 Pole with mounting hole
T
H
H
H
H
D1
C3
D2
D2
Dimensions mm
W CB4/1 CB4/2 CB4/2H CB4/3 CB4/3H CB6/1 CB6/2H CB6/3H CB16/2H CB16/3H 1 2 2 3 3 POLE POLE POLE POLE POLE 23 23 23 25 25.4 25 25.5 25.5 28 27.5 T 11 18 24 25 36 12 26 41 31 48 H 18.5 18.5 18.5 18.5 18.5 19.5 19.5 19.5 23.2 23.2 C * * 14.6 * 13 * 12.6 15 16.5 17 D1 D2 Fixing Screw Stripping Length 6 6 6 6 6 6 6 6 8.5 8.5
6 6
3.5 3.5
M3X16 M3X16
1 POLE 2 POLE 3 POLE 2 POLE 3 POLE
6 6 6 6 3.5 3.5
M3X16 M3X16 M3X20 M3X20
Note: All dimensions are shown in mm, to convert to inches please divide by 25.4. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 47
MINI FEED-THROUGH 15mm DIN Rail
For wire-to-wire connecting in control, automation, instrumentation and power distribution applications. Altech "miniature" terminal blocks offer tremendous space advantage as demanded by certain wiring configurations.
CMT4
CMT4S
FUSE BLOCKS
Certain electrical and control systems require protection by fuses. The terminal has a hinged carrier that has a specially designed space for a cartridge type glass fuse of size O5 x 20 or O5 x 25 mm. The fuse can be engaged or disengaged by the movement of the carrier. Altech fuse terminals are also available with light indication CSFL 4U (L). A specially designed built-in circuit gives light indication in the event of fuse blow out. Fuses are sold separately Altech, see page 34 for details.
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Type of Fuse Used Approvals Wire Range Voltage Rating Current Rating Torque
6 mm 29 x 27 mm 9 mm Polyamide 6.6 2 screw clamps & 1 tapped hole for cross connection --
C US
6 mm 29 x 46 mm 9 mm Polyamide 6.6 2 screw clamps, 2 solder points and 1 tapped hole for cross connection --
C US
E220514
E220514
22-10 AWG 300 V 35 A 6 lb-in Cat. No.
0.5-4 sq.mm 400 V 32 A 0.5 Nm Std. Pk. 100 50 50
22-10 AWG 300 V 35 A 7 lb-in
22-12 AWG Upto 1.5 sq.mm 22-10 AWG 300 V 25 A 7 lb-in Cat. No. CMT4S EPCMT4 PPCMT4 160 V 15 A 0.5 Nm Std. Pk. 50 50 50 300 V 35 A 7 lb-in
Terminal Block End Plate Isolation Partition DIN Rail
for ordering information refer to page 62
CMT4 EPCMT4 PPCMT4
15 mm CA602 100 CA602
15 mm 50
End Stop
for ordering information refer to page 63
COLOR BLOCKS
(other than grey standard)
Internal Jumper
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
CA727/2 CA727/3 CA727/4 CA727/10 CA747/2 CA747/3 CA747/4 CA747/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q
100 50 50 10 100 50 50 10 100 100 100 100 100 10 100 100 100 50 25 100
CA727/2 CA727/3 CA727/4 CA727/10 CA747/2 CA747/3 CA747/4 CA747/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q CA714/2 CA714/3 CA714/4 CA714/10 MT2
100 50 50 10 100 50 50 10 100 100 100 100 100 10 100 100 100 50 25 100
Insulated Internal Jumper Current Bars
Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole
* Add required voltage to part number as a suffix, i.e. CSFL4U(L)/24 fo 24V DC
48
CA714/2 CA714/3 CA714/4 CA714/10 MT2
Marking Tags (MT Type) (MT Type on Lever)
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
CMT4SU
CSFL4U
CSFL4U(L)*
CGMT4
Fuse not included. 6 mm 29 x 35.5 mm 9 mm Polyamide 6.6 2 uneven level solder points & 1 tapped hole for cross connection --
C US
Fuse not included. 8 mm 43 x 58 mm 9.5 mm Polyamide 6.6 2 screw clamps O5x20, O5x25mm
C US
8 mm 43 x 58 mm 9.5 mm Polyamide 6.6 2 screw clamps O5x20, O5x25mm
C US
6 mm 28.5 x 27 mm 9 mm Polyamide 6.6 2 screw clamps --
E220514
C US
E220514
E220514
E220514
22-14 AWG Upto 1.5 sq.mm 22-14 AWG 300 V 15 A - Cat. No. CMT4SU EPCMT4 PPCMT4 160 V 15 A - Std. Pk. 100 50 50 300 V 20 A -
22-10 AWG 600 V 6.3 A 7 lb-in Cat. No. CSFL4U EPCSFL4U PPCSFL4U
0.5-4 sq.mm 22-10 AWG 600 V 6.3 A 0.5 Nm Std. Pk. 100 50 50 600 V 8A 7 lb-in
22-10 AWG 600 V 6.3 A 7 lb-in Cat. No. CSFL4U(L)* EPCSFL4U PPCSFL4U
0.5-4 sq.mm 22-10 AWG 600 V 6.3 A 0.5 Nm Std. Pk. 100 50 50 600 V 8A 7 lb-in
22-10 AWG 0.5-4 sq.mm 22-10 AWG
7 lb-in Cat. No.
0.5 Nm
7 lb-in Std. Pk. 50
CGMT4
15 mm CA602 50 CA602 100 CA602 100
15 mm
CA727/2 CA727/3 CA727/4 CA727/10 CA747/2 CA747/3 CA747/4 CA747/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q
100 50 50 10 100 50 50 10 10 10 10 10 100 10 10 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 100 100 CA711/2 CA711/3 CA711/4 CA711/10 MT8 MT2 100 100 50 25 100 100 MT2 100 49
MT2
100
MT8 MT2
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
MINI FEED-THROUGH Panel Mount
For use when space constraints require extremely compact solutions and internal jumping is required. Individual components can be used to build your own assemblies. Just snap the required number of terminal block components together and place a Mounting Section on each end. The CMB 4 accepts internal jumpers and standard marking tags. * Extremely compact and cost effective * High density * Screw-cage clamp * Internal jumping provision * Polyamide 6.6 * Standard color: gray
CMB4
EP CMB4
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Voltage Rating Current Rating Torque
6 mm 28 x 27 mm 9 mm Polyamide 6.6 2screwclamps&1tappedholeforcrossconnection
C US
Preassembled blocks are also available for quick and easy installations.
See Dimensions below.
E220514
22-10 AWG 300 V 35 A 7 lb-in Cat. No.
0.5-4 sq.mm 22-10 AWG 400 V 32 A 0.5 Nm Std. Pk. 100 50 100 300 V 35 A 7 lb-in
b a
Dimensions mm (in.) CMB4
No. of Cat No. Poles CMB4/2 2 CMB4/3 3 CMB4/4 4 CMB4/5 5 CMB4/6 6 CMB4/7 7 CMB4/8 8 CMB4/9 9 CMB4/10 10 CMB4/11 11 CMB4/12 12 CMB4/13 13 CMB4/14 14 CMB4/15 15 CMB4/16 16 CMB4/17 17 CMB4/18 18 CMB4/19 19 CMB4/20 20 CMB4/21 21 CMB4/22 22 CMB4/23 23 CMB4/24 24 Hole Width (a) Spacing (b) 26 (1.02) 19 (0.75) 32 (1.26) 25 (0.98) 38 (1.50) 31 (1.22) 44 (1.73) 37 (1.46) 50 (1.97) 43 (1.69) 56 (2.20) 49 (1.93) 62 (2.44) 55 (2.17) 68 (2.68) 61 (2.40) 74 (2.91) 67 (2.64) 80 (3.15) 73 (2.87) 86 (3.39) 79 (3.11) 92 (3.62) 85 (3.35) 98 (3.86) 91 (3.58) 104 (4.09) 97 (3.82) 110 (4.33) 103 (4.06) 116 (4.57) 109 (4.29) 122 (4.80) 115 (4.53) 128 (5.04) 121 (4.76) 134 (5.28) 127 (5.00) 140 (5.51) 133 (5.24) 146 (5.75) 139 (5.47) 152 (5.98) 145 (5.71) 158 (6.22) 151 (5.94)
Terminal Block Mounting Section Separator Plate Mounting Screw* Internal Jumper 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole
CMB4 EPCMB4 SPCMB4
CA727/2 CA727/3 CA727/4 CA727/10 CA747/2 CA747/3 CA747/4 CA747/10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 CA607/S/Q
100 50 50 10 100 50 50 10 100 100 100 100 100 10 100 100 100 50 25 100
Insulated Internal Jumper Current Bars
COLOR BLOCKS
(other than grey standard)
When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB
Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole
CA714/2 CA714/3 CA714/4 CA714/10 MT2
Marking Tags
(MT Type)
Mounting Section EPCMB4
* Any length M3 screw may be used.
50 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com
BUSBAR SYSTEM Panel Mount
A quick reliable solution for ground, neutral or low voltage distribution applications. The Busbar System consists of a busbar, busbar supports, and screw clamp terminals for terminating wires NEB 10 (10 x 3 mm) and NEB 6 (6 x 6 mm), tin plated copper busbars are available in one meter lengths. Both have a 140A current carrying capacity. NES plastic support with fixing screws for holding 10 x 3 & 6 x 6 busbar makes placing of busbar an easy task. Busbars up to 200 mm length should be supported at ends by two busbar supports. For busbars exceeding 200 mm length, it is recommended to provide intermediate busbar support. Easy to operate CENC clamp secures wire to the busbar.
CENC4
CENC16
CENC35
Terminal Width Height x Length Stripping Length Insulation Material Type of Connection Approvals Wire Range Current Rating* Torque
7.5 mm 30 x 23.3 mm 12 mm Polyamide 6.6 1 screw clamp connection
C US
9.8 mm 36 x 23.3 mm 16 mm Polyamide 6.6 1 screw clamp connection
E220514
C US
14.5 mm 45 x 27.3 mm 16 mm Polyamide 6.6 1 screw clamp connection
C US
E220514
E220514
22-12 AWG 0.5-6 sq.mm 22-12 AWG 9-6 AWG 6-16 sq.mm 10-6 AWG 7-2 AWG 10-35 sq.mm 8-2 AWG 25 A 14 lb-in 41 A 0.8 Nm 14 lb-in 76 A 76 A 125 A 125 A
14 lb-in 2.0 Nm 17.5 lb-in
25 lb-in 2.5 Nm 25 lb-in
Cat. No. Terminal Block Green Cap ** CENC4
Std. Pk. 50
Cat. No. CENC16
Std. Pk. 50
Cat. No. CENC35
Std. Pk. 50
Busbar (10 x 3 mm) Busbar (6 x 6 mm) Plastic Support with Fixing Screw End Clamp/Bus bar support for rail mounting Marking Tags (MT Type)
NEB10
1m
NEB10
1m
NEB10
1m
NEB6
1m
NEB6
1m
NEB6
1m
NES
50
NES
50
NES
50
CA202
50
CA202
50
CA202
50
MT5
100
MT6
100
MT6
100
* 140A current carrying capacity of busbar should be taken into account while connecting loads. ** Consult for other available colors.
Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 51


▲Up To Search▲   

 
Price & Availability of CTS25U

All Rights Reserved © IC-ON-LINE 2003 - 2022  
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]
 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X